Cleanroom and Semiconductor Equipment
Calibration
All calibrations are preformed using a purpose built special manufactured furnace and with a comparison against an NPL National Physical Laboratory standard.The conductor material used is 0.5 mm diameter (if not otherwise specified) and calibrated at gold point. We re-calibrate each junction on an individual basis after complete manufacturing to ensure that accuracy has been maintained and that no errors or contamination has been induced during our manufacturing process.
Data
The calibration data is calculated over the range of +200ºC to +1200ºC with a step size of 5ºC. If required, your thermocouple can also be calibrated at a lower step size.It is recommended to re-calibrate your thermocouples after a period of 150 hours of in-service use, or every year, which ever occurs sooner.
Service
In addition to the manufacture of new thermocouples, we also offer a comprehensive service package to suit your technical and budgetary needs.
Our repair service represents a further cost saving opportunity in comparison to the New for Old service. Only those parts of a thermocouple are “renewed” that fail to meet the standards required.
Call us now on +44 (0)2380 760909 or contact us oninfo@U4global.com